Mua hàng quá dễ!
Chính sách tốt nhất cho bạn
Trải Nghiệm Thực Tế
Tại phòng Demo của Vina Kara
Giao Hàng Miễn Phí
Khoảng cách 30km
Setup Miễn Phí
Chuyên gia hàng đầu tại Vina Kara
Đổi trả 15 ngày
Phát hiện lỗi do nhà sản xuất
Bảo Hành Tận Nơi
Dễ dàng và tiện lợi
Minimum guaranteed power | R420 |
8 ohm/stereo | 4*2000W |
4 ohm/stereo | 4*3400W |
2 ohm/stereo | 4*4760W |
8 ohm/bridge | 2*6800W |
4 ohm/bridge | 2*9520W |
Alternating Current Power Supply | |
Power | PFC Power |
Rated power demand | 100-240 ± 10%, 50/60 Hz |
Operation voltage | 90V-270V |
Power correction factor cos | > 0.95 @ >500 W |
Standby | 47W and 0.8A |
Gain, Sensitivity | 32dB,35dB,38dB,41 dB |
Maximum Output Voltage/Current | 185V/85A(370V in the BRIDGE MODE) |
Power Comsumption | 230V(115V in the BRIDGE MODE) |
Temperature | |
Environment temperature | 0° – 45C / 32°-113°F |
Cooling system | Tunnel through cooling system |
Performance | |
Frequency Response | 20 Hz – 20 kHz (1 W @ 8 Ω, ± 0.5 dB) |
Signal-to-Noise Ratio | > 110 dBA (20 Hz – 20 kHz, A weighted) |
Crosstalk | > 66 dB @ 1 kHz |
Input Impedance | 10 kg balanced |
Total Harmonic Distortion (THD) | <0.5% from 1 W to full power (Typical value < 0.05%) |
Intermodulation Distortion(IMD) | <0.5% from 1 W to full power (Typical value< 0.05%) |
Damping Factor (8 ohms) | >4000 @ 20-200 Hz |
Slew Rate | 50 V/ μs @ 8 Ω |
Front Panel | |
Indicator LED/per channel | One PCS Green LED: the input signal of XLR ≥ -40dB;
Four pieces Green LED: display the output signal (-20dB,-10dB,-5B,- 3dB) of SPEAKON 1 piece dual LED (Yellow and Red): Protective state/Clip state/Over heat/Over load |
LED Screen | 1. Display per channel operation mode:
Mono mode, Bridge mode and Stereo mode; Display the temperature of the equipment: the device turns on protective state, and the temperature of the equipment > 75°C; |
Power Switch | Press “I” -on; Press “O” -off. |
Dust-proof | Two pieces dust-proof cotton,
it can take off to clearn from the bottom of front pannel |
Application | |
Signal in-connection | 4 Channel: One balanced XLR(with lock) female per channel;
Signal in-connection 2 Channel: One balanced XIR(with lock) female and one balanced XLR male per channel. |
Signal out-connection | One SPEAKON per channel connect to loudspeakers. |
Power cord | Fixed to the device, and the CSA( cross sectional area) of the cord is 3 x 2.5mm?, and the cord is 1.5 meters long. |
Multiple-Functions Switch | Two Sensitivity Switches, one Mode Switch and one Clip Switch. |
Structure (The size and weight depond on different series and shipping demand) | |
Dimensions | 482x44x380mm3 / 482x44x470mm3 |
Net weight | 12Kg |
Packing size | 580x580x119mm3/ 615x615x119mm3 |
Shipping weight | 14kg |